Our 4 x 106 Wet Belt sander boasts a 1 HP TEFC direct drive motor, automatic belt take up and tensioning system and side skirting to protect the drive motor from water spray. The solenoid activated twin water spray provides ample water delivery to any style belt you choose to use from diamond to cerium impregnated. The exterior is enamel coated for corrosion resistance with a heavy duty water bucket for longevity and an extended water tray to prevent overspray on the surround floor in your coldshop. Our belt sander utilizes a pressure molded urethane Roller Platen for longer wear life and easy grinding contact and reduced belt wear. Water hookup is a standard 1/8 inch NPT water valve and comes ready to work out of the crate. The front roller bar is completely removable for easier access to the belt grinding surface and the sander comes with an adjustable splash guard on the front for added safety. The water bucket also has a small sacrificial diode in the back that will slowly corrode over time instead of your water bucket corroding. Once the diode completely corrodes, just order a new one and keep your water bucket from degrading over time. 4 x 106 belt size.
Write Your Own Review
Only registered users can write reviews. Please, log in or register