8 Inch Brush Wheel for Pumice

$144.00
SKU
BRUSH-8
Brush wheels from Merker in Germany are used with pumice for pre-polishing glass surfaces and textured surfaces using a grinding or polishing lathe. These brush wheels are 8 inch diameter wheels with a 1 inch arbor hole to fit onto any modern lathe or for use with our Spatzier 1 inch spindles.
Write Your Own Review
You're reviewing:8 Inch Brush Wheel for Pumice
Customer Questions
I'm looking for a wheel for that my students could apply a wax/oil mixture to buff and seal a batuto surface with. Do you think this wheel would do the trick? It's none abrasive correct? Thank you.

Quite possibly. The brush wheels are most often used with pumice for battuto surfaces so it would definitley move into all the areas, but I've never tried it with an oil/wax mixture. I would recommend going slowly so it doesn't throw the mixture all ...

Is Cerium what is used with this wheel?

No. The brush wheel is used with pumice for a pre-polish or "dirty" polish stage. It will not give a full polish with pumice but brings the glass very close to a full polish. The brush wheel will not work with cerium.

Please, mind that only logged in users can submit questions