Is there a video or example on using this? I have this, but don't know what to do with it.

We do not currently have a video on the stacking wax, but the basic rundown is that you melt the wax onto the surface of the pieces of glass you wish to drill or cut and then place a thin piece of sacrificial glass on top. Make sure that the wax makes a complete seal around the area that you are going to drill, or cut. After you drill or cut the area you can warm the pieces of glass again enough to soften the wax and remove the sacrifical piece of glass from teh surface. You should have a clean cut or drill hole with no chipping on your main piece of glass.

Please, mind that only logged in users can submit questions
Copyright © 2024 His Glassworks, Inc. All rights reserved.