10 Pound Kit XTR-GL Epoxy Adhesive
$900.00
SKU
XTR-10
XTR-GL is a water-clear, low viscosity, two-part epoxy for laminating and bonding glass. It is also fantastic for crack repair due to its lower viscosity.
The epoxy is mixed 3:1 and cures in roughly 72 hours. It will remain clear for the life of the joint and can be colored if required.
XTR Part B is considered a Dangerous Good and cannot ship to PO Boxes and must ship via DG handling when shipped via air transport, which will entail a DG handling fee from the carrier of $250.00 USD. This fee is already reflected in the shipping costs for any air transport.
- XTR-GL is a two-part epoxy consisting of a Resin and a Hardener mixed 3:1 by weight
- Specific gravity- 1.15
- Viscosity - 500cps
- Index of Refraction - 1.517
- Shore D Hardness - 71
- Cure time - 48 hours, 72 hours for complete bond cure
- Tensile Strength, psi - 6,490
- Elongation % - 1.75
- Flexural Strength, psi - 11,818
- Compressive Strength, psi - 11,046
- Modulus of Elasticity, psi - 523,972
Write Your Own Review
Customer Questions
Login and Registration Form