1/4 Pound Kit XTR-311 Epoxy Adhesive

$50.00
SKU
XTR-.25

XTR-311 is a water clear, low viscosity, two part epoxy for laminating and bonding glass. It is also fantastic for crack repair due to it's lower viscosity.

The epoxy is mixed 3:1 and cures in roughly 72 hours. It will remain clear for the life of the joint and can be colored if required.

XTR Part B is considered a Dangerous Good and cannot ship to PO Boxes and must ship via DG handling when shipped via air transport, which will entail a DG handling fee from the carrier of $250.00 USD. This fee is already reflected in the shipping costs for any air transport.

  • XTR-311 is a two part epoxy consisting of a Resin and a Hardener mixed 3:1 by weight
  • Specific gravity- 1.15
  • Viscosity - 500cps
  • Index of Refraction - 1.517
  • Shore D Hardness - 82
  • Cure time - 48 hours, 72 hours for complete bond cure
Write Your Own Review
You're reviewing:1/4 Pound Kit XTR-311 Epoxy Adhesive
Your Rating
Customer Questions
Can you thin this resin down with acetone? I was hoping it was similar to hxtal in this regard.
XTR has a faster cure time than HXTAL, so it's a little more dangerous to thin it with acetone.You can thin it down. Still, you'll need to ensure a good air source to keep air moving across the surface to help evaporate the acetone out of the epoxy before...
Please, mind that only logged in users can submit questions
We found other products you might like!
Copyright © 2024 His Glassworks, Inc. All rights reserved.